UTC TruVision IP Dome Manual de usuario descargar pdf (Pagina 90)

10BChapter 11: Configuring recording settings

84 TruVision DVR 60 User Manual

The Locked column indicates whether a file is locked or not. Closed lock

icons indicate locked files while opened lock icons indicate unlocked files. The

Lock button toggles between Lock and Unlock, depending on the file.

6. Click Cancel to exit out of the Video Search menu.

Setting the HDD to read-only

When you set an HDD to read-only, recorded video files cannot be written to the

HDD. If multiple HDDs are used, the DVR automatically records to the next HDD

not set to read-only

To set a HDD to read-only:

1. Enter the HDD Management screen by selecting System, and then Hard

Disk from the main menu.

2. Click the General tab.

3. Select the HDD you want to set to read-only.

4. Click Mode. The Mode screen displays.

5. Select Read-Only.

6. Click OK to save your changes. The HDD is now read-only.

Note: In order to enable recordings on that particular HDD again, you must

set the HDD status back to R/W (Read/ Write) in the HDD Mode screen.

Configuring advanced HDD settings

To prepare for any unexpected failures of hard disk drives, we recommend that

you make a back up of your HDD. You must have more than one HDD in your

DVR to set up HDD redundancy.

To set up HDD redundancy:

1. Enter the HDD Management screen by selecting System, and then Hard

Disk from the main menu.

2. Click the General tab.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 163 164

Sin comentarios

UTC TruVision IP Dome Manual de usuario Pagina 90