UTC TruVision IP Dome Manual de usuario descargar pdf (Pagina 100)

11BChapter 12: Configuring alarm settings

94 TruVision DVR 60 User Manual

4. Enter an alarm name for the selected output in the Alarm Name field.

5. Select an option in the Timeout box.

The timeout setting lets you define how much longer a signal remains active

even after the alarm has ended. If you select Manually Stop, the signal

remains active until it is manually acknowledged by pressing the alarm button

on the front panel or remote control (see “Triggering alarm outputs manually”

below).

6. Select a schedule for the alarm output. For example, if you only want the

alarm signal to be active during the working hours.

7. Copy these settings to other outputs, if required.

8. Select OK to save and exit.

Triggering alarm outputs manually

When an alarm is activated, the DVR can be set up so that the alarm must be

manually acknowledged in order to be silenced.

All user levels (administrator, manager and operator) can manually acknowledge

an alarm.

To trigger alarm outputs manually:

1. Enter the Manual Alarm screen by selecting System in the main menu. In the

System View screen, select Alarm Out. The Manual Alarm screen appears.

Select on of the following:

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 163 164

Sin comentarios

UTC TruVision IP Dome Manual de usuario Pagina 100