UTC TruVision IP Dome Manual de usuario descargar pdf (Pagina 46)

5BChapter 6: Configuring the live mode display

40 TruVision DVR 60 User Manual

Table 12: Description of the Monitor setup screen

Option Description

Device name The name to use for the DVR.

Device address The device number to use for the DVR when programming the remote

control or keypad.

VGA resolution Define the VGA resolution.

Select one of the options from the drop-down list. Default is

1024×768/60 HZ.

Transparency menu Modify the transparency of the menus on-screen relative to the background

to make the menu screens easier to read or less prominent on-screen.

Default is non-transparent.

Select one of the options from the drop-down list.

Monitor standard The video standard used is auto detected.

Modify the video standard used to PAL or NTSC.

Monitor brightness Modify the video output brightness.

Mouse pointer speed Modify the speed of the mouse pointer.

Scaling monitor A / B Enable/disable the monitor display of the main (A) and spot (B) monitors

size to accommodate for differently sized monitors.

Password required Enable/disable system password.

DVR name and address

The DVR name is the name that appears on-screen such as during start up.

When you use the IR remote control or keypad to operate the TVR 60, the

TVR 60 must have a device address (bus ID). The default device address is 255

for a remote control.

If there is more than one DVR used, each device must have its own unique

device address as otherwise the IR remote control will control all the DVRs

together.

To configure the device name and address:

1. Enter the Display Settings screen by selecting Display in the main menu.

2. Click the Monitor tab. The Monitor screen appears.

3. In the Device Name box, enter a name for the TVR 60 unit. You can enter up

to 38 characters.

4. Click the Device address edit box. The virtual keyboard appears. Enter a

numeric value and click Enter. Up to eight digits can be entered. Default

address for the remote control is 255

5. Click the Apply button to save the settings.

6. Click OK to return to the main menu.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 163 164

Sin comentarios

UTC TruVision IP Dome Manual de usuario Pagina 46