UTC TruVision IP Dome Manual de usuario descargar pdf (Pagina 122)

14BChapter 15: HDD management

116 TruVision DVR 60 User Manual

Checking HDD status

You can check the status of any of the installed HDDs on the DVR at anytime.

To check the status of a HDD:

1. Enter the HDD Management screen by clicking System in the main menu,

and then Hard Disk.

2. Note the status of the HDD listed under the Status column.

If the status is listed as Normal or Sleeping, the HDD is in working order. If it

is listed as Abnormal and has already been initialized, the HDD needs to be

replaced. If the HDD is Uninitialized, you need to initialize it before it can be

used in the DVR. Refer to “Initializing HDDs” on page 113 for more

information.

Alternatively, you can also view the SMART

information of your installed HDDs.

SMART, short for Self-Monitoring, Analysis and Reporting Technology is a

monitoring system for hard disk drives to detect and report on various indicators

of reliability in the hopes of anticipating failures.

To view SMART information of a HDD:

1. Enter the Log Search menu by clicking System in the main menu, and then

View Log.

2. Set Major Type to Information.

3. Set Minor Type to HDD SMART.

4. Enter the Start Time and End Time.

5. Click Search to begin log search. A result list is displayed.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 163 164

Sin comentarios

UTC TruVision IP Dome Manual de usuario Pagina 122