UTC TruVision IP Dome Manual de usuario descargar pdf (Pagina 54)

6BChapter 7: Controlling a PTZ camera

48 TruVision DVR 60 User Manual

To configure PTZ dome camera settings:

1. Enter the PTZ Settings screen by selecting PTZ in the main menu.

2. In the Camera box, select the PTZ dome camera to be configured from the

drop-down list.

3. Select the baud rate, data bit, stop bit, parity and flow control for the camera.

The default values are:

 Baud rate: 9600

 Data bits: 8

 Stop bits: 1

 Parity: None

 Flow control: None

Note: Click the Default button to return all values to default settings.

4. When all changes have been made, click the OK button to save the changes

and return to the main menu.

Assigning PTZ protocols

Assign a PTZ protocol and address to a camera to allow PTZ control of the

camera while in PTZ mode. See Appendix C “PTZ protocols” on page 135 for the

complete list of available protocols. The default protocol is GE RS-485.

To configure PTZ settings:

1. Enter the PTZ Settings screen by selecting PTZ in the main menu.

2. In the Camera box, select the PTZ dome camera to be configured from the

drop-down list.

3. Select a PTZ protocol in the PTZ protocol box.

4. Enter the PTZ address. Up to three digits can be entered. The number should

correspond with that used in the PTZ dome camera itself.

5. When all changes have been made, click the OK button to save the changes

and return to the main menu.

Copying settings to other cameras

PTZ dome camera settings can be copied to other PTZ dome cameras

connected to the DVR. In the Copy To option of the PTZ menu, select a

particular camera, or all cameras. Click Copy.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 163 164

Sin comentarios

UTC TruVision IP Dome Manual de usuario Pagina 54