UTC TruVision IP Dome Manual de usuario Pagina 40

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 66
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 39
3BChapter 4: Configuring the camera
36 TruVision IP Dome Open-Standards User Manual
The recording schedule of the motion detection must fall within the time period of
the event schedule in order to operate correctly. See “Events scheduling” on
page 30 for more information.
Figure 17: Motion detection menu
Defining a motion detection alarm requires the following tasks:
1. Events schedule: Define the schedule during which the system inputs and
outputs are operational to detect alarms. See Events schedulingon page
30.
2. Recording schedule: Define the schedule during which motion detection can
be recorded. SeeDefining a recording schedule” (see page 34).
3. Settings areas: Define the on-screen area that can trigger a motion detection
alarm and the detection sensitivity level. See below.
4. Linkage: Specify the method of response to the alarm. See below.
To define the motion detection areas and response method:
Note: The deployment and motion detection recording schedules must also be
defined for motion to be detected and recorded. See “Events scheduling” on
page 30 and “Defining a recording schedule” on page 34.
1. In the Channel Parameters folder click the Motion detection subfolder to
open its screen.
2. Check the Enable Motion Detection box.
Note: Deselect the “Enable Motion Detection” option to disable the motion
detection alarm.
3. Define the motion detection area or areas.
Vista de pagina 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 65 66

Comentarios a estos manuales

Sin comentarios