UTC TruVision IP Dome Manual de usuario descargar pdf (Pagina 33)

3BChapter 4: Configuring the camera

TruVision IP Dome Open-Standards User Manual 29

5. Select the time format from the Time format list box. Formats include: 24-

hour and 12-hour.

6. Select a display mode for the camera from the OSD Status list box. Display

modes include:

• Transparent & non-flashing. The screen image appears through the

text. This is default.

• Transparent & flashing. The screen image appears through the text. The

text flashes on and off.

• Non-Transparent & unflickering. The screen image is behind the text.

• Non-Transparent & flashing. The screen image is behind the text. The

text flashes on and off.

7. Click Save to save changes.

Defining the system time

NTP (Network Time Protocol) is a protocol for synchronizing the clocks of

network devices, such as IP cameras and computers. Connecting network

devices to a dedicated NTP time server ensures that they are all synchronized.

To define the system time and date:

1. In the “Channel Parameters” folder click the Time & Date subfolder to open

its screen.

2. Check one of the options for setting the time and date:

Synchronize with an NTP server: Check the enable box and enter the

server NTP address.

- Or -

Set manually: Enter the current date and time values.

3. Select your time zone.

4. Click Save to save changes.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 65 66

Sin comentarios

UTC TruVision IP Dome Manual de usuario Pagina 33