UTC TruVision IP Dome Guía de instalación descargar pdf (Pagina 21)

Installation Guide 21

5. Reinstall the lower dome and tighten the screws.

Mounting the wedge dome camera

To mount the wedge dome camera on a ceiling:

1. Drill the screw holes on the ceiling with the supplied

drilling template. To route the cables from the base of the

camera, cut a cable hole in the ceiling.

2. Fix the converter pan to the ceiling (optional).

Note: If required, you can remove the tabs (A) on the

side of the converter pan to pass the cables through.

3. Loosen the set screws with a hex wrench (supplied) to

remove the dome enclosure.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

UTC TruVision IP Dome Guía de instalación Pagina 21